Skip to content

For engineers

How BuildingIQ works under the hood.

Whose problem are we solving?

For the main decision: lower building cost — with no headache over technical implementation and maintainability.

  • Lower cost, proven against a corrected baseline
  • No rip-and-replace — runs on the BMS you already have
  • Implementation and maintainability stay our job, not yours

Four modules, one building model.

Simulate

Try the retrofit before you buy it.

Load simulation, HVAC variants, ROI and payback — from your CAD and your energy tariffs, before a single fitting is touched.

See more →

Core

One canonical model of your building.

Rooms, zones, and KPIs live in one CAD-validated model. Every recommendation, every report, every dashboard reads from the same source of truth.

See more →

Control

Recommend today, automate when you're ready.

Reads Home Assistant, Sensibo, Shelly, Tuya. Suggests first, writes back only after you approve — with physics guardrails and a dedicated emergency stop.

See more →

Inventory & Maintenance

Every asset, every service window, every battery.

Assets linked to rooms and systems, predictive maintenance from telemetry, staged battery alerts, and a service plan that closes the loop after each fix.

See more →

Supported technologies

Connects to the BMS you already run — no rip and replace.

BuildingIQ reads from and writes to the leading building automation platforms and field protocols.

Building automation systems

  • Siemens Desigo
  • Schneider EcoStruxure
  • Johnson Controls Metasys
  • Honeywell
  • Tridium Niagara
  • Delta Controls
  • Distech
  • Automated Logic
  • Carrier i‑Vu
  • Trend
  • ABB Cylon
  • Sauter
  • Priva
  • Beckhoff
  • WAGO

Protocols

  • BACnet/IP
  • BACnet MS/TP
  • BACnet/SC
  • Modbus RTU/TCP
  • KNX
  • LonWorks
  • DALI/DALI‑2
  • M‑Bus
  • OPC UA
  • MQTT
  • SNMP
  • EnOcean
  • SMI
  • DMX
  • REST APIs
  • Cloud integrations
See how it connects to your BMS →

Process intake engine

Your standard becomes the control logic — ASHRAE or your own.

BuildingIQ reads the guideline you operate by and turns it into traceable control rules. No hand-coded sequences, no lost intent between the spec and the BMS.

From plan to proven performance

From simulation to realization — and from realization to proven OPEX savings.

1

Simulate

Calibrated model from CAD, tariffs and metering. Retrofit variants with ROI and payback — before anything is bought.

2

Plan

Ranked measures with budget, expected savings and schedule — approved by you before anything is ordered.

3

Realize

Implementation and commissioning, verified against the same simulation that promised the savings.

From realization

1

Measure

Meters and BMS stream into the same model. Simulated vs. real consumption, tracked continuously.

2

Monitor

OPEX and cost development against the defined KPIs, per building and across the portfolio.

3

Predict & maintain

Predictive maintenance reads equipment signals — filters, compressors, valves, sensor batteries — and schedules service before faults drive up cost. Your OPS team is benchmarked on resolution and fix rates, and verified savings compound month over month.

4

Optimize & report

Deviations become ranked actions; every figure in the monthly OPEX report traces back to a measurement. The system also proposes contract and delivery optimisations — AI-drafted, reviewed by real lawyers in the loop, powered by thelegalmind.os.

Defined KPIs

  • Simulated vs. real deviation
  • Energy kWh/m²·a
  • Savings €/a
  • Comfort & IAQ compliance
  • OPEX per m²
  • Unplanned downtime
  • Maintenance cost per m²
  • Faults caught before failure

Fix things before they break — and prove which fix worked.

BuildingIQ turns anomalies in temperature, humidity, power, runtime, and battery state into ranked service tickets — each with a physics-anchored explanation and an expected impact. After the fix, we measure the same baseline again and record whether the action worked.

  1. 1Signal
  2. 2Diagnose
  3. 3Ticket
  4. 4Verified fix

Benchmark your OPS team's efficiency

Mean time to resolve, first-time-fix rate, repeat-fault rate and open backlog per technician — compared across your buildings and against comparable sites. You see exactly where the team performs and where it loses hours.

Identify and implement continuous cost savings

Every verified fix and ranked finding feeds a savings backlog: measures with expected impact, implemented on your schedule, and verified against the same baseline — so savings are proven, not promised, and compound every month.

Example: Grundfos ALPHA1 25-60 N 180 · 12-month cycle · next service due in 47 days · open anomalies: 0.

AI you can audit.

BuildingIQ is not a black box. Every automated decision carries a physics guardrail, a receipt, and a human-approvable override — and a dedicated emergency stop for the day none of that is enough.

  • Physics guardrails

    No setpoint is written outside an engineered safety band. Dry-mode below 24 °C protects against overcooling when humidity is the real issue.

  • Dry-run by default

    Every recommendation is a proposal, not a command. Automated write-back is opt-in per site.

  • Every AI action has a receipt

    We record model version, inputs, outputs and the raw sensor snapshot at decision time. Reproducible on demand.

  • Humans stay in the loop

    Any override is logged with the operator, timestamp, reason, and the old and new value.

  • Emergency stop

    A separate endpoint immediately shuts HVAC down — outside the normal approval flow, always available.

How our AI stays accountable →

Live in four weeks, without a rip-and-replace.

  1. 01

    Connect

    BACnet, Modbus, KNX, MQTT, Home Assistant — read-only to start.

  2. 02

    Import CAD

    Rooms and zones are validated against your drawings, not guessed.

  3. 03

    Calibrate

    Two weeks of telemetry build the physics baseline for your envelope.

  4. 04

    Act

    Ranked actions, dry-run recommendations, verified fixes.

See the full onboarding →

Questions we get asked

Do we need to replace our BMS?

No. BuildingIQ reads your existing BACnet, Modbus, KNX or MQTT points, plus Home Assistant, Sensibo and Shelly where they are in place. Write-back is opt-in and comes later.

How does BuildingIQ do predictive maintenance without installing new hardware?

We derive anomaly signals from the telemetry your BMS, Sensibo, Shelly, or Home Assistant already produce. Battery state, runtime, power drift, setpoint tracking and humidity control are enough for most fault classes; add-on vibration or acoustic sensors are supported but optional.

Is predictive maintenance enabled?

Yes — with fully AI-powered inventory, maintenance process support and lifecycle management, including AI-supported incident workflows.

Is the AI a black box?

No. Every automated action carries a physics guardrail, a reproducible AiRun record (inputs, model version, outputs) and an audit event. Operators can override any decision; the override is logged with reason and old/new value.

How long until we see something useful?

First ranked actions typically land within four weeks: one week for connection and CAD import, two weeks of calibration, then continuous operation.

Where is our data hosted?

AWS Frankfurt (eu-central-1) only. A GDPR Art. 28 Data Processing Agreement is available before the pilot starts.

The AI orchestration for hotels, professional buildings and commercial premises.

30 minutes, live on one of your own sites. No slides.

Book a demo